

The first color-tunable LED bulb for professional film, stage and event productions. Not bigger than a normal LED bulb, it contains a CRMX receiver as well as RF and Bluetooth modules for the AsteraApp. It can be powered via lamp socket or with a standard power bank and thanks to its Titan LED engine it displays precise colors and white tones with ultra-high CRI and TLCI.
Technical specifications
Optical
Colors: Red, Green, Blue, Mint, Amber
Luminous Flux: 750lm*
Total LED power: 14W
Max power draw: 10W
TLCI (3200-6500K)*: ≥96
CRI (3200-6500K)*: ≥96
Strobe: 0-25Hz
Beam Angle: 120˚
Field Angle: 180˚
Pixels: 1
(* Typical value)
Electrical
Each bulb allows AC and DC power
AC Power: FP5-E26: 100-120 VAC, FP5-E27: 100-240VAC
DC Power: 5-18VDC, 2.1A via DC socket
Control
Setup Via AsteraApp or Battery Base
Wireless Modules: UHF, CRMX, Bluetooth
DMX: Wireless DMX (CRMX)
Range
UHF: 100m | 110 Yards
CRMX: 100m | 110 Yards
Bluetooth: 3m | 3 Yards
Construction
Housing: Aluminium + polycarbonate
Ingress Protection: IP44
Relative humidity: 0-100%
Ambient Temperature: 0-40˚C | 32-104˚F
Weight: 0.24kg | 0.53Lbs
Dimensions: Ø70 x 130mm | Ø2.76” x H5.12”
Downloads
Accessories
Compatible controllers
Photometric measurements (CRI, TLCI)
Firmware Release Notes

Tunable White
with range from 1,750K
to 20,000K.

Precise colors
Display exact CCT, RGB & HSI values or reproduce standard color gels.

Ultra High Color Rendering
TLCI ≥96, CRI ≥96, CRI Re≥90 from 3200K to 6500K

Power through AC + DC
Power through lamp socket or via external battery (5~18VDC)

Wireless DMX
Built-in LumenRadio CRMX receiver

Direct App Control
No AsteraBox required

PowerStation (Battery Pack & external display)
Connect the integrated cable to your bulb’s DC connector to power it up. While connected, the Power Station acts as a remote display to program DMX addresses and settings which the bulb will store in its memory. It can also set colors, effects, brightness etc which the bulb will continue to display when in a powered lamp socket or connected to a power bank. Apart from its backside magnets the Power Station features an airline track to attach mounting accessories such as Babypin and Single Stud Ring.
Multiple Mounting options

Airline Tracks

PowerStation Hanger

Backside Magnets

Astera System
A smart control system of your Film Lighting Bulb. Infrared remote, wireless DMX and app work together to enable big setups. Your entire installation can be set up, monitored and adjusted in a fast and convenient way. Mini Titan Tube | Film Lighting Tube | Film Lights
App control (UHF)
Control| Mini Titan Tube
Create complex programs out of colors, effects, and settings. NYX Bulb will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which Tube should receive commands. Film Lights Control system
Film Lighting Tube
Monitor Film Lighting Tubes
Keep a complete overview of the status and all settings of your NYX Bulb while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual NYX Bulb and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if NYX Bulb are controlled via DMX.
Film Lighting Tube
Set-up faster film light, mini Titan Tube
Set up your Film Light conveniently out of the distance.
Set DMX address and DMX footprint for one or several NYX Bulbs; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
Film Lighting Tube
Wireless DMX (2.4GHz)
LumenRadio for film light
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Compatibility of film lights
We included the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
IR Remote Control
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Features unique to the NYX Bulb

Talkback+
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.

Seamless Runtime
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.

TruColor Calibration
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.

Effects
Quickly build programs out of colors and effects, trigger them or make them match a beat.

Flicker Free
Scrambled PWM technology to avoid flickering when filming.

Green/Magenta Correction
Adjust green/magenta during content creation to reduce postproduction work.

Scheduled StandBy
Switch lights into power-saving standby and schedule them to wake up when the production starts.

Dynamic PowerBoost
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.

Emergency Lights (requires PowerStation to work).
Switches to white light when AC power is cut to keep your event save

DJ Feature
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.

Other Features
The AsteraApp is packed with many additional items and new features are frequently added via software update.
What`s up
Astera | Contact us | Imprint | Cookies Notice | Privacy notice
© 2007-2022 Astera LED Technology GmbH. All rights reserved.