Hyperion Tube

Technical Specifications

Please note that due to a component shortage, we had to do internal changes to the Hyperion Tube and units manufactured after October 2021, they have the BTB feature built-in and are now called FP3-BTB.

Order Code

FP3

FP3-BTB

LED Engine

Titan LED Engine

Titan LED Engine

Colors

RGBMintAmber

RGBMintAmber

Total LED Power

144 W

144 W

LED Power Draw

92 W

92 W

Luminous Flux 4000K

5 800 Lumens

5 800 Lumens

Light Output 4000 K @ 1m

1 570 Lux

1 570 Lux

CRI (Ra)/ TLCI 3200- 6500 K*

≥96

≥96

Beam Angle

135° x 115°

135° x 115°

Field Angle

175° x 160°

175° x 160°

Strobe

0 – 25 Hertz

0 – 25 Hertz

Pixels

32

32

Battery Runtime

up to 20 hours

up to 20 hours

Battery Lifetime

70 % after 300 cycles

70 % after 300 cycles

Charging Time (nominal)

3 hours

3 hours

DC Input

24 VDC – 4 A

24 VDC – 4 A

DC Connector

5.5 mm x 2.1 mm

5.5 mm x 2.1 mm

Wired DMX

Yes (via FP3-DTL / PWB-2-86)

Yes (via FP3-DTL / PWB-2-86)

CRMX Receiver

Built-in

Built-in

BluetoothBridge BTB

No

Built-in

Wireless Protocols

CRMX, UHF

CRMX, UHF, Bluetooth, WiFi

Wireless Range

CRMX/UHF up to 300 m / 330 yds

CRMX/UHF up to 300 m / 330 yds Bluetooth up to 3 m / 3.3 yds

Infrared Control

Yes

Yes

Housing Material

Polycarbonate, metal end caps

Polycarbonate, metal end caps

IP Rating

IP65 (only with FP1-SP)

IP65 (only with FP1-SP)

Ambient Operating Temperature

0 – 40 °C / 32 – 104 °F

0 – 40 °C / 32 – 104 °F

Weight

2.9 kg / 6.39 lbs

2.9 kg / 6.39 lbs

Dimensions

2 031 mm x Ø 43 mm / 79.9" x Ø 1.7"

2 031 mm x Ø 43 mm / 79.9" x Ø 1.7"

Mounting Options

2x M5 thread, 2x Holder (with 2x M5 and 1x 1/4"-20UNC thread)

2x M5 thread, 2x Holder (with 2x M5 and 1x 1/4"-20UNC thread)

*Typical Values

What's in the Box

Typical Spectras

RF Characteristics

For FP3 Hyperion Tube

Wireless Modules

Modulation

ERP (Transmitter)

Channel Count

EU: UHF***(863-870MHz)

FHSS

<25mW

47

USA: UHF (917-922.20MHz)

FHSS

<25mW

53

AUS: UHF (922.30-927.50MHz)

FHSS

<25mW

53

SGP: UHF (920.50-924.50MHz)

FHSS

<25mW

41

KOR: UHF (917.9-921.5MHz)KOR: UHF (917.9-921.5MHz)

FHSS

<25mW

10

RUS: UHF (868.75-869.12MHz)

FHSS

<25mW

6

JPN: UHF (922.80-926.40MHz)

FHSS

<25mW

19

CRMX (2402-2480MHz)

FHSS

–

79

***General allocation of frequencies for use by short-range radio applications Spectrum usage regulations:

Frequency range in MHz1)

Maximum equivalent radiant power (ERP)

Additional parameters / frequency access and interference mitigation techniques

865 – 868

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

868,0 – 868,6

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

868,7 – 869,2

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 0.1% can be used.

869,40 – 869,65

500 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 10% can be used.

869,7 – 870,0

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

1) The use of adjacent frequency bands within this table as a single frequency band is permitted, provided that the specific conditions for each of these adjacent frequency bands are met. 2) „duty cycle“ means the ratio of Σ(Ton)/(Tobs) expressed as a percentage, where ‚Ton‘ is the ‚on-time‘ of a single transmitting device and ‚Tobs‘ is the observation period Ton is measured in an observation frequency band (Fobs). Unless otherwise specified in this general allocation, Tobs is a continuous period of one hour and Fobs is the applicable frequency band in this general allocation (table). 3) Frequency access and interference mitigation techniques shall be used whose performance level at least meets the essential requirements of Directive 2014/53/EU or the Radio Equipment Act (FuAG). Where relevant techniques are described in harmonised standards, the references of which have been published in the Official Journal of the European Union pursuant to Directive 2014/53/EU, or parts thereof, performance shall be ensured which is at least equivalent to those techniques.

RF Characteristics

For FP3-BTB Hyperion Tube

Wireless Modules

Modulation

ERP (Transmitter)

Channel Count

EU: UHF***(863-870MHz)

FHSS

<25mW

47

USA: UHF (917-922.20MHz)

FHSS

<25mW

53

AUS: UHF (922.30-927.50MHz)

FHSS

<25mW

53

SGP: UHF (920.50-924.50MHz)

FHSS

<25mW

41

KOR: UHF (917.9-921.5MHz)

FHSS

<25mW

10

RUS: UHF (868.75-869.12MHz)

FHSS

<25mW

6

JPN: UHF (922.80-926.40MHz)

FHSS

<25mW

19

CRMX (2402-2480MHz)

FHSS

–

79

Bluetooth 5.0 LE (2402-2480MHz)

FHSS

10mW (BLE)

40

WiFi (2412-2472MHz)

DSSS, OFDM

<100mW

13

***General allocation of frequencies for use by short-range radio applications Spectrum usage regulations:

Frequency range in MHz1)

Maximum equivalent radiant power (ERP)

Additional parameters / frequency access and interference mitigation techniques

865 – 868

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

868,0 – 868,6

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

868,7 – 869,2

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

869,40 – 869,65

500 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

869,7 – 870,0

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

1) The use of adjacent frequency bands within this table as a single frequency band is permitted, provided that the specific conditions for each of these adjacent frequency bands are met. 2) „duty cycle“ means the ratio of Σ(Ton)/(Tobs) expressed as a percentage, where ‚Ton‘ is the ‚on-time‘ of a single transmitting device and ‚Tobs‘ is the observation period Ton is measured in an observation frequency band (Fobs). Unless otherwise specified in this general allocation, Tobs is a continuous period of one hour and Fobs is the applicable frequency band in this general allocation (table). 3) Frequency access and interference mitigation techniques shall be used whose performance level at least meets the essential requirements of Directive 2014/53/EU or the Radio Equipment Act (FuAG). Where relevant techniques are described in harmonised standards, the references of which have been published in the Official Journal of the European Union pursuant to Directive 2014/53/EU, or parts thereof, performance shall be ensured which is at least equivalent to those techniques.