Titan LED Engine, 25W, Wireless & Wired DMX
Beam shaping with six included light modifiers and a large range of mounting options make HydraPanel more flexible than any other product in its class. The full-spectrum Titan LED Engine generates an impressive 1300 Lumen output while running on battery power for 1:45h. All packed into a solid watertight housing of just 600g weight and 166mm length (1.3lb, 6.5″).
Order Code: FP6
LED Engine: Titan LED Engine
Total LED Power: 25W
LED Power Draw: 17W
Luminous Flux 3200K: 1102 Lumens
Luminous Flux 4000K: 1287 Lumens
Luminous Flux 5500K: 1298 Lumens
Light Output 3200 K @ 1m: 443 Lux
Light Output 4000 K @ 1m: 512 Lux
Light Output 5500 K @ 1m: 516 Lux
CRI (Ra)/ TLCI 3200- 6500 K*: ≥96
Beam Angle: 110° x 100°
Field Angle: 150° x 145°
Strobe: 0 – 25 Hz
Battery Runtime: up to 20 hours
Battery Runtime Max Brightness: 1h 45m
Battery Lifetime: 70 % after 300 cycles
Charging Time (nominal): 3 hours
DC Input: 24VDC – 0.85 A
DC Connector: 5,5mm x 2,1mm
Wired DMX: Yes Via FP1-PWB/FP3-DTL/PWB2-86
CRMX Receiver: Built-in
BluetoothBridge BTB: Built-in
Wireless Protocols: CRMX, UHF, Bluetooth, WiFi
Wireless Range (CRMX/UHF): Up to 300 m / 330 yds
Bluetooth: Up to 3 m / 3.3 yds”
Infrared Control: Yes
Housing Material: Polymer & Metal
IP Rating: IP65
Ambient Operating Temperature: 0° – 40 °C / 32 – 104 °F
Weight: 604g / 1.3 lb
Dimensions L x W x D: 166mm x 85mm x 43.5mm / 6.53″ x 3.34″ x 1.71″
Single Unit Case
PowerSupply for Helios/Titan Tube
DiffusorSheet 100 (included)
EggCrate 40 (included)
EggCrate 60 (included)
Intensifier 80 (included)
SoftFrame 100 (included)
BabyPin ¼“ (included)
Titan LED Engine
Industry-leading colors and whites
Wireless and Wired DMX
Built-in CRMX module and wired DMX via Astera PowerBox
6 included modifiers to adjust beam from 40° to 100°
New Control Panel
Touch Slider for faster setting of colors, CCT, brightness etc
Easy Integration into Scenery
Unobtrusive Look when installed via backside magnet
Stand on floor, mount via Babypin, screw to walls etc.
Add third-party accessories and mount on cameras
Combine up to 4 panels
Synchronized control from a single control panel
A smart control system of your Astera wireless fixture. Infrared remote, wireless DMX and app work together to enable big setups. Your entire installation can be set up, monitored and adjusted in a fast and convenient way. Mini Titan Tube | Film Lighting Tube | Film Lights
App control (UHF)
Control Astera Lights
Create complex programs out of colors, effects, and settings. Astera lights will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which Tube should receive commands. Film Lights Control system
Monitor Film Lighting Tubes
Keep a complete overview of the status and all settings of your light while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual light and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if the light is controlled via DMX.
Set-up faster film light, mini Titan Tube
Set up your Film Light conveniently out of the distance.
Set DMX address and DMX footprint for one or several lights; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
Wireless DMX (2.4GHz)
LumenRadio for film light
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Compatibility of film lights
We included the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
IR Remote Control
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Features unique to HydraPanel
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Scrambled PWM technology to avoid flickering when filming.
Adjust green/magenta during content creation to reduce postproduction work.
Switch lights into power-saving standby and schedule them to wake up when the production starts.
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Switches to white light when AC power is cut to keep your event save
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
The AsteraApp is packed with many additional items and new features are frequently added via software update.