Titan LED Engine, 15W, CRMX + Wired DMX
Say hello to our next-generation multi-purpose light. In addition to being a battery-powered uplight and spotlight with 5 different beam options, multiple PixelBricks can be connected to form clusters and shapes. With about 10cm edge length and 1kg weight, it is small and lightweight while still featuring a powerful output of high-quality light which meets the highest demands of film, TV and stage clients.
Order Code: PB15
LED Engine: Titan LED Engine
Colors: RGB Mint Amber
Total LED Power: 15W
Power Draw: 12W
Light output: 2700K, 3200K, 5500K:* 388lm, 450lm, 375lm
CRI(Ra)/TLCI 3200-6500K*: ≥96
Beam Angle: 13°
Strobe: 0 – 25Hz
Pixels: 1
*Typical value
Battery Lifetime: 70 % after 300 cycles
Battery Runtime: up to 20 hours
Charging Time (nominal): 4 hrs
Input Voltage: 24VDC
Input Current: 0.8A
Wired DMX: Yes (via PWB-2-86)
CRMX Receiver: Built-in
Wireless Frequencies: CRMX 2.4GHz, UHF, Bluetooth
Range (m/yds): 300 / 330yds
Housing: Aluminium
IP Rating: IP65
Ambient Temperature (°C/°F): 0°- 40° / 32°- 104°
Weight (kg/lbs): 1.12 kg / 2.47 lbs
Dimensions (mm/inches): 91 x 91 x 94 / 3.6 x 3.6 x 3.7
Charging Case for PixelBrick
(PB15-CHRCSE)
Accessory Case for PixelBrick
(PB15-ACCCSE)
BrickTilt
(PB15-BTLT)
BrickHinge
(PB15-BHI)
BrickConnect
(PB15-BCN)
BrickMount
(PB15-BMO)
BrickBracket
(PB15-BBR)
TrackPin
(AX-TP)
EyeBolt
(AX1-EBLT)
BeamSoftener for PixelBrick
(PB15-BSO)
Flood Filter (30°) for PixelBrick
(PB15-FF)
BrickDome
(PB15-BDM)
PowerBox 2x86W
(PWB-2-86)
PowerData Combination Cable (5m/10m/15m)
(PWB-CAB-5-10-15)
PowerData Combination Cable (200mm)
(PWB-CAB-0.2)
Astera ARC1
AsteraBox
LumenRadio Transmitters
Combine several units into a cluster
Create shapes using various mounting accessories
Titan LED Engine
Filters and Dome create different beams and looks
AirlineTrack for accessories
Backside display with dedicated Color and Brightness buttons
Removeable bracket
Direct App Control
(No AsteraBox required)
A smart control system of your Astera wireless fixture. Infrared remote, wireless DMX and app work together to enable big setups. Your entire installation can be set up, monitored and adjusted in a fast and convenient way. Mini Titan Tube | Film Lighting Tube | Film Lights
Control PixelBar
Create complex programs out of colors, effects, and settings. PixelBrick will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which Tube should receive commands. Film Lights Control system
Film Lighting Tube
Monitor Film Lighting Tubes
Keep a complete overview of the status and all settings of your PixelBrick while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual PB15 PixelBrick and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if PB15 PixelBrick is controlled via DMX.
Film Lighting Tube
Set-up faster film light, mini Titan Tube
Set up your Film Light conveniently out of the distance.
Set DMX address and DMX footprint for one or several PB15 PixelBrick; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
Film Lighting Tube
LumenRadio for film light
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Compatibility of film lights
We included the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Scrambled PWM technology to avoid flickering when filming.
Adjust green/magenta during content creation to reduce postproduction work.
Switch lights into power-saving standby and schedule them to wake up when the production starts.
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Switches to white light when AC power is cut to keep your event save
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
The AsteraApp is packed with many additional items and new features are frequently added via software update.
What`s up
Astera | Contact us | Imprint | Cookies Notice | Privacy notice
© 2007-2021 Astera LED Technology GmbH. All rights reserved.
