105W, Titan LED Engine.
The AX9 utilizes the AX5’s successful 3-in-1 concept which allows it to be used as wireless light and elegant uplight as well as a wired PAR light for longer or bigger installations. This makes it an extremely cost-efficient light and keeps your investment to a minimum.
The AX9 packs extreme brightness in a compact and light housing while still giving you industry-leading colors and white tones thanks to its Titan LED Engine.
Order Code: AX9
LED Engine: Titan LED Engine
Total LED Power: 105W
LED Power Draw: 70W
Light output – 2700k, 3200k,5500k*: 2497lm / 3008lm / 2869lm
Emittance @2m – 2700k, 3200k, 5500k*: 9700 lx / 9900 lx / 9600 lx
CRI(Ra)/TLCI 3200-6500k*: ≥96
Beam Angle: 13°
Strobe: 0 – 25Hz
Battery Lifetime: 70 % after 300 cycles
Battery Runtime: up to 20 hours
Charging Time (nominal): 5 hours
AC Input: 100-240VAC, 50/60Hz, 2.3A; 2.3A/115VAC ~ 1.1A/230VAC; 110W
Wired DMX: Yes
CRMX Receiver: Built-in
Wireless Frequencies: CRMX 2.4GHz, UHF, Bluetooth
Range (m/yds): 300 / 330 (3/3,3 Bluetooth)
Housing Material: Aluminium
IP Rating: IP65
Ambient Temperature (°C/°F): 0° – 40° / 32° – 104°
Weight (kg/lbs): 5.66 / 12.5
Dimensions (mm/inches): 175 x 222 x 256 / 6.9 x 8.7 x 10.1
Firmware release notes
Titan LED Engine
Industry-leading colors and white tones
removable and with airline track, 3/8″ thread and 1/2″ hole
including dedicated brightness & color buttons
2 filters included
to change your uplight’s colour and make it fit to any occasion
Quick release kickstand
to adjust angle for fast and efficient wall uplighting
place AX9 upside down into the Charging Plate or Charging Case
Comparison between AX5 and AX9
A smart control system of your Astera wireless fixture. Infrared remote, wireless DMX and app work together to enable big setups. Your entire installation can be set up, monitored and adjusted in a fast and convenient way. Mini Titan Tube | Film Lighting Tube | Film Lights
App control (UHF)
Create complex programs out of colors, effects, and settings. AX9 PowerPAR will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which Tube should receive commands. Film Lights Control system
Film Lighting Tube
Monitor Film Lighting Tubes
Keep a complete overview of the status and all settings of your AX9 while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual AX9 PowerPAR and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if AX9 PowerPAR is controlled via DMX.
Film Lighting Tube
Set-up faster film light, mini Titan Tube
Set up your Film Light conveniently out of the distance.
Set DMX address and DMX footprint for one or several AX9 PowerPAR; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
Film Lighting Tube
Wireless DMX (2.4GHz)
LumenRadio for film light
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Compatibility of film lights
We included the most reliable wireless DMX module on the market compatible with CRMX and other wireless DMX standards but not W-DMX G5 and City Theatrical.
IR Remote Control
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Features unique to AX9 PowerPAR
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your production and be sure that your lights won`t run out while still getting the maximum brightness.
Individually calibrated lights lead to 100% color consistency and exact color reproduction of color temperature and filter gels.
Quickly build programs out of colors and effects, trigger them or make them match a beat.
Scrambled PWM technology to avoid flickering when filming.
Adjust green/magenta during content creation to reduce postproduction work.
Switch lights into power-saving standby and schedule them to wake up when the production starts.
This exclusive feature makes the light able to display the maximum brightness at all time and intensify non-white colors.
Switches to white light when AC power is cut to keep your event save
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
The AsteraApp is packed with many additional items and new features are frequently added via software update.