Want create site? Find Free WordPress Themes and plugins.

The perfect PAR, the one light you`ll ever want

45W RGBAW  (3x 15W)  – 13° Beam Angle

Optimized for a fast return of investment, the AX5 Perfect PAR replaces your wireless and wired PARs as well as battery uplights. It’s the one and only light you’ll need to get.

Technical specifications

Optical

Colours: RGBAW Philips Lumileds

CRI: 92

Total LED power: 45W

Luminous Flux: 1080Lm

Emittance (@2m): 4800Lx

Strobe:  0-25Hz

Beam Angle: 13 ˚

Pixels: 1

Electrical

Battery: LG Chem Lithium-ion

Battery Lifetime: 70% after 300 cycles

Battery Runtime: Up to 20 hours

LED Lifetime: 50000 Hours

Charging time (nominal): 5 Hours

Input Voltage: 90-260V 50-60Hz

Control

Wireless Modules: 865-870MHz | 902-928MHz | 2.4GHz

Range: 300m | 330 Yards

DMX: Supports CRMX and W-DMX

Wired DMX

Construction

Housing: Aluminium

IP Rating: IP65

Relative humidity: 0-100%

Operating Temperature: 0-40 ˚C | 32-104 ˚F

Weight: 3.40kg |7.5Lbs

Dimensions: 145 x 190 x 221 (mm)

Downloads

Datasheet

Manual

2D drawing

DMX Profile

Accessories

32° Flood Filter
(AX5-FF (Included))

17° x 46° WallWash Filter
(AX5-WWF (included))

Double spigot
(AX1-BLT)

White Volcano Cover
(AX5-VULCVR-WT)

Charging case
(AX5-CHRSE)

Charging plate
(AX5-CHRPLT-8)

Mirrored Flex Cover
(AX5-FLXVR-MIR)

White Flex Cover
(AX5-FLXVR-WT)

Compatible controllers

Astera ARC1

AsteraBox™

CRMX Nova TX

W-DMX Transmitter

3 x 15W RGBAW LEDs

with the latest high-
precision Gaggione lenses

Untitled-1

Slide-out bracket

to transform the AX5 into

an uplight within seconds

Clip-in filters

High efficiency flood and

wall wash filters clip in safely

Waterproof connectors

Charging contact as well as waterproof

Powercon True1 + XLR connectors

Elegant covers

to change your uplight`s colour

and make it fit to any occasion

Quick release kickstand
to adjust angle for fast and 

efficient wall uplighting

Astera System

A smart control system where Infrared remote, wireless DMX and app work together 

to enable big setups that can be set up, monitored and adjusted in a fast and convenient way.

App control (UHF)

Control lights

Create complex programs out of colors, effects and settings. The lights will remember and repeat these effects without requiring a constant wireless link. 

Quickly create groups of lights, assign positions and select which lights should receive commands.

Monitor lights

Keep a complete overview over the status and all settings of your lights while you operate them.

View battery status, radio signal, DMX address and which lights you have targeted. 

Diagnose individual lights and even get informed if a light is being moved or switched off. 

This works while you control lights by the app but also if  lights are controlled via DMX.

Set-up faster

Set up your lights conveniently out of the distance. 

Set DMX address and DMX footprint for one light or several lights; 50 units can be prepared in less than 5 minutes out of the distance. 

After your job, do a quick master reset of all settings or a partial one of only selected settings.

Wireless DMX (2.4GHz)

LumenRadio

The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR  adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology,  the most stable wireless DMX protocol available.

Full compatibility

Astera Lights can be controlled by LumenRadio CRMX transmitters and also by W-DMX from wireless solutions (up to G4S). 

Astera lights support both wireless DMX standards  so you can use them together with almost all other wireless lights and transmitters.

IR Remote Control

 

Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.

When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.

Unique Astera Features

Talkback+

Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.

Seamless runtime

Set the length of your event and be sure that your lights won’t run out while still getting the maximum brightness.

TruColor calibration

100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.

Flicker free

Astera allows to adjust the PWM frequency to make sure it doesn’t interfere with your camera’s frame rate.

Anti-theft

The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.

DJ feature

Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.

Scheduled stand-by

Switch lights into power-saving standby and schedule them to wake up when the event starts.

Dynamic power-boost

The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.

Emergency light

Switches automatically to white light and runs of its battery when AC power is cut off.

Astera | Contact us | Imprint |  Cookies Notice | Privacy notice

© 2007-2017 Astera LED Technology GmbH. All rights reserved.

Did you find apk for android? You can find new Free Android Games and apps.
Processing your request, please hold on...

Subscribe to Astera newsletter

We always have some exciting news! Enter your email address and name below to be the first to know.
CATALOG FACEBOOK TWITTER LINKEDIN YOUTUBE