Technical Specifications

Order Code

AST-QUKPN

LED Engine

Titan LED Engine

Colors

RGBMintAmber

Output Gain

Yes

LED Power Draw

75 W

CRI (Ra) / TLCI 3200 – 6500 K*

≥96

Strobe

0 – 25 Hertz

Battery Runtime

up to 20 hours

Battery Runtime (max. Brightness)

4 h 30 m

Battery Lifetime

70 % after 500 cycles

Charging Time (nominal)

5 hours 15 min

AC Input

"100 – 240 VAC, 50/60 Hertz, 115 VAC – 2 A / 230 VAC – 1 A"

AC Connector

PowerCON TRUE1 IN/OUT

Power Consumption (max.)

100 W

Wired DMX

Yes

CRMX Receiver

Built-in

BluetoothBridge BTB

Built-in

Wireless Protocols

CRMX, UHF, Bluetooth, WiFi

Wireless Range

"CRMX/UHF up to 300 m / 330 yds Bluetooth up to 3 m / 3.3 yds"

RDM Support

No / Wireless and / or wired

Infrared Control

Yes

PrepBox compatible

Yes

IP Rating unwired

IP65

IP Rating wired

IP65

Ambient Operating Temperature

0 – 40 °C / 32 – 104 °F

Weight

6450 g / 14.22 lbs

Dimensions (L x W x D)

236.2 mm x 195.8 mm x 295.8 mm / 9.3" x 7.71" x 11.65"

Mounting Options

AirlineTrack, 3/8" – 16 UNC thread, Yoke (with 3/8" – 16 UNC thread, 1/2" hole)

What's in the Box

Typical Spectras

RF Characteristics

Wireless Modules

Modulation

ERP (Transmitter)

Channel Count

EU: UHF***(863-870 MHz)

FHSS

< 25 mW

47

USA: UHF (917-922.20 MHz)

FHSS

< 25 mW

53

AUS: UHF (922.30-927.50 MHz)

FHSS

< 25 mW

53

SGP: UHF (920.50-924.50 MHz)

FHSS

< 25 mW

41

KOR: UHF (917.9-921.5 MHz)

FHSS

< 25 mW

10

RUS: UHF (868.75-869.12 MHz)

FHSS

< 25 mW

6

JPN: UHF (922.80-926.40 MHz)

FHSS

< 25 mW

19

CRMX (2402-2480 MHz)

FHSS

–

79

Bluetooth 5.0 LE (2402-2480 MHz)

FHSS

10 mW (BLE)

40

WiFi (2412-2472 MHz)

DSSS, OFDM

< 100 mW

13

***General allocation of frequencies for use by short-range radio applications Spectrum usage regulations:

Frequency range in MHz1)

Maximum equivalent radiant power (ERP)Maximum equivalent radiant power (ERP)

Additional parameters / frequency access and interference mitigation techniques

865 – 868

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

868,0 – 868,6

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

868,7 – 869,2

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 0.1% can be used.

869,40 – 869,65

500 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 10% can be used.

869,7 – 870,0

25 mW

Requirements for frequency access and mitigation techniques3) Alternatively, a maximum duty cycle2) of 1% can be used.

1) The use of adjacent frequency bands within this table as a single fre- quency band is permitted, provided that the specific conditions for each of these adjacent frequency bands are met. 2) „duty cycle“ means the ratio of Σ(Ton)/(Tobs) expressed as a percentage, where ‚Ton‘ is the ‚on-time‘ of a single transmitting device and ‚Tobs‘ is the observation period Ton is measured in an observation frequency band (Fobs). Unless otherwise specified in this general allocation, Tobs is a contin- uous period of one hour and Fobs is the applicable frequency band in this general allocation (table). 3) Frequency access and interference mitigation techniques shall be used whose performance level at least meets the essential requirements of Directive 2014/53/EU or the Radio Equipment Act (FuAG). Where relevant techniques are described in harmonized standards, the references of which have been published in the Official Journal of the European Union pursuant to Directive 2014/53/EU, or parts thereof, performance shall be ensured which is at least equivalent to those techniques.