60W RGBW (4 x 15W) CREE LEDs – 13 ° beam angle
Battery powered PAR, Astera’s working bull with a standard beam features 4 ultra-bright CREE LEDs and comes in a rugged, waterproof housing with a multifunctional bracket. It can be controlled with infrared remote control, AsteraApp, CRMX and/or W-DMX.
LED chips: RGBW
Light Output: 60W
Luminous flux: 1675 lm
Lighting: 6250 lx
Strobo frequency: 0-25 Hz
Beam angle: 13 °
Battery: LG Chem Lithium-ion
Battery life: 70% after 300 runs
Battery life: up to 20 hours
LED life span: 50,000 hours
Charging time (nominal): 7 hours
Input voltage: 90-264 V | 47-63 Hz
Input current: 1.8A / 115VAC | 1.0A / 230VAC
Inrush current: Cold start 60A / 230VAC
Funkmodul: 865-870 MHz | 902 – 928 MHz | 2.4 GHz
Range: 300 m
Wireless DMX: supports CRMX and W-DMX
IP protection class: IP65
Relative humidity: 0 – 100%
Operating temperature: 0 – 40 ° C
Weight: 6.10 kg
Dimensions: 279 x 296 x 253 (mm)
Dimensions: L279 x W253 x H296mm
Weight: 6.10 kg
4 x 15W RGBW CREE LEDs,
13 deg. Beam angle, 1675 lm
32° Flood & 17° x 46° Filter disks (included)
and can easily be inserted
Bracket supports bolts and brackets
For mounting on trusses and stages
Backside display, suspension hooks
and PowerconTrue1 In/Out sockets
Foldable legs becomes handle
For easy carrying
Intelligent control, with infrared remote control, radio DMX and app to work together to enable large setups of battery PAR that can be set up, monitored and adjusted quickly and easily.
Control the lamps
Create complex programs of colors, effects, and settings. The AX7 battery powered PAR will store and repeat these effects without requiring a wireless connection.
Create groups, assign positions, and select which battery powered PAR is to receive commands.
Lamps are monitored
Keep a complete overview of the status and settings of your AX7 battery PAR while you operate them.
Look at battery` status, signal, DMX-Adress and which AX7 battery PAR you have targeted.
Check your own AX7 battery PAR and be informed when a lamp is moved or turned off.
This works when you control the battery powered PAR with the app, but also when they are controlled via DMX.
Quickly set up
Set up your battery PAR comfortably from a distance.
Set DMX addresses and DMX tables for one or more lamps; 50 units can be prepared in less than 5 minutes.
After their event, they can perform a quick master reset for all or only partially selected settings.
Wireless DMX (2.4GHz)
The AsteraBox can be used as a radio DMX transmitter; Simply connect them to your DMX console with the included XLR adapter to transfer 1 DMX universe with the most stable CRMX technology.
Astera battery powered PAR can be controlled by LumenRadio CRMX transmitters and also by W-DMX from Wireless Solutions (up to G4S). Astera`s battery powered PAR support both wireless DMX standards, so you can use them with almost all other wireless battery PAR and transmitters.
Simple commands such as on / off, colors, pre-programmed effects, etc. can be sent directly to the lamps with our infrared remote control. When programming lamps with the AsteraApp, the IR remote control can be used to confirm the settings for individual battery powered PAR.
Unique Astera features
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your event and be sure that your lights won’t run out while still getting the maximum brightness.
100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.
Adjustable PWM frequency to avoid flickering, green/purple balance to minimize post-production work.
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Switch lights into power-saving standby and schedule them to wake up when the event starts.
The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.
Switches automatically to white light and runs of its battery when AC power is cut off.