AX10 – The Brightest Wireless Event Spotlight
135W (9 x 15W) Philips RGBAW LEDs – 13° Beam Angle
AX10 features high quality Philips RGBAW LEDs, TruColour calibration, long-life Samsung batteries and an uniquely engineered housing to increase cooling and optimize performance. Battery powered, remote controlled IP65 Waterproof for outdoor use, and a carry handle built into its stand.
Total LED power: 135W
Luminous Flux: 3350Lm
Emittance (@2m): 10350Lx
Beam Angle: 13 ˚
Battery: Samsung Lithium-ion
Battery Lifetime: 70% after 300 cycles
Battery Runtime: Up to 20 hours
LED Lifetime: 50.000 Hours
Charging time (nominal): 7 Hours
Input Voltage: 90-264V 47-63Hz
Input current: 70A/230VAC
Wireless Modules: 865-870MHz | 902-928MHz | 2.4GHz
Range: 300m | 330 Yards
DMX: Supports CRMX and W-DMX
IP Rating: IP65
Relative humidity: 0-100%
Operating Temperature: 0-40 ˚C | 32-104 ˚F
Weight: 7.98kg |17.5Lbs
Dimensions: 279 x 296 x 253mm | 10.9 x 11.6 x 9.9 (inch)
Environment: Indoor | Outdoor
Dimensions: L279 x W253 x H296mm
9 x 15W RGBAW Philips LEDs
13 deg. Beam angle, 3350Lm
32° Flood & 17° x 46° Filter disks (included)
and can easily be inserted
Bracket supports bolts and C-clamp
for attaching to truss and stages
Backside display, suspension hooks
and PowerconTrue1 In/Out sockets
Foldable legs becomes handle
For easy carrying
A smart control system where Infrared remote, wireless DMX and app work together
to enable big setups that can be set up, monitored and adjusted in a fast and convenient way.
App control (UHF)
Create complex programs out of colors, effects and settings. The lights will remember and repeat these effects without requiring a constant wireless link.
Quickly create groups of lights, assign positions and select which lights should receive commands.
Keep a complete overview over the status and all settings of your lights while you operate them.
View battery status, radio signal, DMX address and which lights you have targeted.
Diagnose individual lights and even get informed if a light is being moved or switched off.
This works while you control lights by the app but also if lights are controlled via DMX.
Set up your lights conveniently out of the distance.
Set DMX address and DMX footprint for one light or several lights; 50 units can be prepared in less than 5 minutes out of the distance.
After your job, do a quick master reset of all settings or a partial one of only selected settings.
Wireless DMX (2.4GHz)
The AsteraBox works as a wireless DMX transmitter; just connect it with the included XLR adapter to your DMX console and you can transmit 1 DMX universe with CRMX technology, the most stable wireless DMX protocol available.
Astera Lights can be controlled by LumenRadio CRMX transmitters and also by W-DMX from wireless solutions (up to G4S).
Astera lights support both wireless DMX standards so you can use them together with almost all other wireless lights and transmitters.
IR Remote Control
Simple commands like ON/OFF, colors, preloaded effects etc can be sent with our infrared remote control directly to the lights.
When programming lights with the AsteraApp the IR remote can be used for confirming settings on individual lights.
Unique Astera Features
Detect all available lights, set them up, check their status, configure DMX addresses and DMX profiles.
Set the length of your event and be sure that your lights won’t run out while still getting the maximum brightness.
100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.
Astera allows to adjust the PWM frequency to make sure it doesn’t interfere with your camera’s frame rate.
The lights give visual and audible alarm and send notification to the AsteraApp if they are being moved during an event.
Auto BPM analyzes the beat and matches programs to it, flash buttons can trigger special effects while being held down.
Switch lights into power-saving standby and schedule them to wake up when the event starts.
The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.
Switches automatically to white light and runs of its battery when AC power is cut off.